Sign in with
Sign up | Sign in
Your question
Solved

Working on my new build...no VGA signal... Help!

Tags:
  • Systems
Last response: in Systems
Share
September 27, 2013 5:32:45 PM

I have pretty much gotten everything together on my build, been following neweggs how to build a computer part 2.

My computer turns on, but my monitor reads VGA no signal(when I have my graphics card in and when I don't) I have the z87 deluxe dual motherboard. It reads dd53 when turned on. I don't have my keyboard hooked up....not sure if it makes a difference.

My case is nzxt h630, gpu is the titan, and CPU is i7-4770k.


Any help is really appreciated! I've been googling it for hours. Was going to try and switch the onboard graphics to pci-e but it won't even get a signal when I take my gpu out.

More about : working build vga signal

September 27, 2013 5:38:01 PM

Oh and my monitor is an asus LCD 27"
m
0
l

Best solution

September 27, 2013 5:38:42 PM

You need to connect the monitor to the GPU, not the motherboard.
Share
Related resources
September 27, 2013 6:07:18 PM

I got it to work now, had the wrong setting on my monitor. Oops.

I'm in the bios now, it says CPU fan error and my 1866 ram says its running at 1333. Just need to figure that out now. Thoughts?
m
0
l
September 27, 2013 6:07:59 PM

I got it to work now, had the wrong setting on my monitor. Oops.

I'm in the bios now, it says CPU fan error and my 1866 ram says its running at 1333. Just need to figure that out now. Thoughts?
m
0
l
September 27, 2013 6:08:44 PM

I got it to work now, had the wrong setting on my monitor. Oops.

I'm in the bios now, it says CPU fan error and my 1866 ram says its running at 1333. Just need to figure that out now. Thoughts?
m
0
l
September 27, 2013 6:09:42 PM

You will have to manually change the speed of your RAM. That is how it works.

Is your CPU cooler fan working and plugged into the correct CPU fan pins on the motherboard?
m
0
l
September 27, 2013 6:12:06 PM

My CPU cooler is the cooler master hyper 212 evo
m
0
l
September 27, 2013 6:14:36 PM

I think so? I followed a tutorial for it and the fans are running. It came with a fan hub, so most fans were plugged into it. This was the one part I had a hard time following on the video.
m
0
l
September 27, 2013 6:17:51 PM

Yes, just double checked. My fan is running and plugged into the correct spot on the motherboard
m
0
l
September 27, 2013 6:24:01 PM

No, I lied. CPU fan was plugged into the wrong spot! Fixed it, now it's the right spot. Did I mention this is my first build:p 
m
0
l
September 27, 2013 9:02:47 PM

One last question: went into bios to change ram to 1866.

It says dram information
XMP ddr3-1867 10-11-10-30-2N-1.50v-1.20v
DIMM_A1: corsair 8192mb 1333mhz
DIMM_A2: corsair 8192mb 1333mhz
DIMM_A3: corsair 8192mb 1333mhz
DIMM_A4: corsair 8192mb 1333mhz



Just wondering why the 4 dimms read 1333mhz but it says up above total memory:32768mb(ddr3 1866mhz)
m
0
l
September 27, 2013 9:06:09 PM

I do not know. Once you have an OS installed, ues a program like CPU-Z to see what the RAM is actually running at.
m
0
l
!