J Jims0923 Distinguished Oct 10, 2011 25 0 18,530 Sep 29, 2013 #1 My case (Corsair 300R) has 2 1 pin female connectors for the power, a two pin female for the reset and the motherboard a 3 pin male for the power. Where do I get one and what's it called.
My case (Corsair 300R) has 2 1 pin female connectors for the power, a two pin female for the reset and the motherboard a 3 pin male for the power. Where do I get one and what's it called.
Solution alexoiu Sep 29, 2013 I see. Connect the wires from the case to the 9 pin system panel header (connect to PLED+ , PLED-), near the Power button wires.
I see. Connect the wires from the case to the 9 pin system panel header (connect to PLED+ , PLED-), near the Power button wires.
alexoiu Titan Nov 1, 2012 39,821 249 126,990 Sep 29, 2013 #2 What motherboard using? Usually, boards have 2 pins for the power switch (PWR and GND). Upvote 0 Downvote
J Jims0923 Distinguished Oct 10, 2011 25 0 18,530 Sep 29, 2013 #3 alexoiu : What motherboard using? Usually, boards have 2 pins for the power switch (PWR and GND). Upvote 0 Downvote
J Jims0923 Distinguished Oct 10, 2011 25 0 18,530 Sep 29, 2013 #4 The motherboard is an H87 AS Rock Fatality ATX. The one wire that splits into two one pin female wires on the case say power LED. Upvote 0 Downvote
The motherboard is an H87 AS Rock Fatality ATX. The one wire that splits into two one pin female wires on the case say power LED.
alexoiu Titan Nov 1, 2012 39,821 249 126,990 Sep 29, 2013 Solution #5 I see. Connect the wires from the case to the 9 pin system panel header (connect to PLED+ , PLED-), near the Power button wires. Upvote 0 Downvote Solution
I see. Connect the wires from the case to the 9 pin system panel header (connect to PLED+ , PLED-), near the Power button wires.