Sign in with
Sign up | Sign in
Your question

blue screan right after boot and its only there for .1 sec

Last response: in Storage
Share
October 2, 2013 8:34:12 PM

just installed a gigabyte 990FXA-UD3 mobo in and put a amd 8 core in it with a corsair H80 in it and put his corsair vengeance 16gb ram and crossfire 2gb ati R7800's and when it boots it gos in to windows start up and then flashes the blue screen and restarts and asks to repair the repeats and i cant figure it out so please help

More about : blue screan boot sec

a b G Storage
a c 1692 V Motherboard
October 2, 2013 8:57:09 PM

Do you have the latest BIOS, or at least the F9? Need that for your 8350?
m
0
l
October 2, 2013 9:10:11 PM

Tradesman1 said:
Do you have the latest BIOS, or at least the F9? Need that for your 8350?


ho do i do that i have never updated the bios and do i just put it on a flash drive and install it because it dont get to the desk top just show windows start up with the 4 lights and then flashes blue and then starts over?
m
0
l
Related resources
a b G Storage
a c 1692 V Motherboard
October 2, 2013 9:18:59 PM

Check your mobo website for the BIOS downloads and directions
m
0
l
October 2, 2013 9:20:23 PM

Tradesman1 said:
Check your mobo website for the BIOS downloads and directions


10/4
m
0
l
a b G Storage
a c 1692 V Motherboard
October 2, 2013 9:28:29 PM

Keep us updated
m
0
l
October 2, 2013 9:59:40 PM

Tradesman1 said:
Keep us updated


just updated the bios to F9 and it still does the same thing any other ideas?
m
0
l
October 2, 2013 10:48:04 PM

This happened to me recently. It was because of a bad Windows update, it didn't finish installing and the power went out or something like that. I'm fairly certain this is the case with you too. I fixed it by re-installing Windows, but I didn't have much on my computer, so it might be too extreme for you. Try restoring the whole PC from a system backup image (if you have one). You could also re-install windows as a custom (fresh installation). As long as you don't format the drive, all the files from your existing installation will be in a folder called Windows.old in your C:\ drive after install.
m
0
l
a c 888 G Storage
a c 84 V Motherboard
October 2, 2013 11:26:44 PM

start pressing f8 right after POST and select "Disable automatic restart on ..." so that you can get to the actual error message please.
m
0
l
a b G Storage
a c 1692 V Motherboard
October 3, 2013 8:15:02 AM

Try with another stick, if no joy, go back to 1 stick, go into BIOS and raise DRAM voltage + 0.05 and CPU/NB voltage about the same , then try the second stick
m
0
l
!