DRAM_LED computer wont post (not a hardware issue)

dsb9

Honorable
Apr 9, 2013
10
0
10,510
Well here's the run down,
I've had my PC for about 2 and a bit years and recently I decided to upgrade. I bought a 120gb Samsung ssd, a new case and a new psu (750w thermal take smart power)

After the computer was reinstalled everything was running fine for a few days, now I have the recurring issue.

My main problem is that the computer wont boot (all of the time) when I power it on everything spins, but I get no post / video. The Dram led is on and has a slow blink. Now sometimes when I do some tinkering say, press the Dram led pull some plugs out and reseat the memory I MIGHT be able to get a boot but unfortunately there's no combination that I know that solves the issue everything.

Now when I do get the computer to boot the dram led will still come on for a few seconds but after that the display will show, overclocking failed press F1 to yadadadada.

Now I know that I haven't been overclocking so I guess the problem is something to do with the ram settings / timings etc.

Also, I've looked at countless forums and posts. I've tried heaps of things. For some reason I'm confident it's not a hardware as such problem but more a settings issue.

Full specs:

I7 2700k (stock clock)
Asus p8z68 v-lx
4x4 Kingston 1300mhz ram
750w thermaltake smartpower
GTX 560 gpu



Any help is appreciated