Sign in with
Sign up | Sign in
Your question
Solved

New Build - No signal

Tags:
  • GPUs
  • New Build
  • Build
  • Graphics
Last response: in Graphics & Displays
Share
October 7, 2013 2:58:50 AM

Hello! English isn't my mother tongue so i'll try my best to write properly :) 
Last night I just started to build my pc. I build it outside the case just to make sure everything worked fine, but with the motherboard, RAM, PSU, CPU and GPU installed I got no signal on the screen.

The motherboard gets power, (24 pins and 8 pins are conected) the fans on the GPU are working, but no signal. I've tried to conect the screen to my laptop to see if it worked and it did. So the monitor it's ok.

Then I tried to start without the GPU, and it worked and I got into the bios.

So without GPU works but when I install it I got no signal. I don't know if its the GPU, the pciE slot o something else... I've got no other GPU or MB to test.

My build parts are:

MB: Asrock z77 extreme4
CPU:3770k
GPU: Gigabyte 797OC
PSU: Aerocool 650w 80Plus
RAM: Corsair vengance 8Gb

I don't know what to do...I will appreciate any help.

Thank you so much.

More about : build signal

Best solution

October 7, 2013 3:47:00 AM

Hi, If newer BIOS version available, try updating the BIOS. Try the DVI or VGA connection with the graphics card.
Share
October 10, 2013 5:01:12 AM

Hi, sorry to be late, but I had a lot of work and I had no time to check it out.

Thanks for your advice, now It's working!! I tried with a DVI and it was a mistake on the monitor configuration XD Buah I got so fustrated that I think I missed the obvious... Thank you sooooo much.

I would like to ask a last question...now I have like a black frame on the screen, the image isn'tall over the screen...I don't know if I'm explaining myself hehehe
My monitor it's a benq GW2260HM and I've got 1920x1080 resolution...Do I have to change something on the Catalyst Control Center?

Thank you so much for your patience :) 
m
0
l
Related resources
October 10, 2013 7:56:48 AM

Thank you so much! You helped me a lot :) 
m
0
l
!