No Post / CPU Fan or Motherboard LED, Case LED comes on

tsiegert25

Honorable
Oct 7, 2013
12
0
10,510
Hello all!

So I'm working on putting together a build consisting of the following parts.

AsRock 960GM/U3S3FX motherboard
NZXT Phantom 410 White case
Corsair CX430M Power supply
AMD FX8150 processor

Currently, I only have the cpu installed on the motherboard, and I have plugged in the 24 and 4 pin connectors. I have attached the P+ and P-, as well as the power switch connectors to the motherboard. When i turn on the psu and press power on the case, the psu fan starts up, the case led lights up, however there is no activity on the motherboard. Is there anything else I can do to test this before I try getting a replacement motherboard. I have attempted to remove as much as possible from the board to get to a POST, but when I power the system on, the cpu fan is not spinning, and I am getting no beeps from the board. Any advice?

Thanks so much for the help, I really appreciate it!