flash of digital camera

Status
Not open for further replies.
Solution
"The flash does not work.
You cannot use the flash when:
Shooting in Background Defocus mode
Burst mode is selected.
[Anti Motion Blur], [Night Scene], [Hand-held Twilight], [High Sensitivity] or [Fireworks] mode is
selected in Scene Selection.
Shooting in Sweep Panorama mode
Shooting in movie mode
Set the flash to [On] when the Scene Selection mode is set to [Landscape], [Gourmet], [Pet],
[Beach], [Snow] or [Underwater] (DSC-WX200) mode."

"Cont. Shooting Settings
You can select Single (single-image), Continuous Shooting as the shooting mode.
1. Press (Cont. Shooting Settings) on the control wheel.
2. Select the desired mode with the control wheel.
(Single
Shooting)
The camera shoots a single image.
(Continuous Shooting) The camera shoots up to 10 continuous frames in one...
"The flash does not work.
You cannot use the flash when:
Shooting in Background Defocus mode
Burst mode is selected.
[Anti Motion Blur], [Night Scene], [Hand-held Twilight], [High Sensitivity] or [Fireworks] mode is
selected in Scene Selection.
Shooting in Sweep Panorama mode
Shooting in movie mode
Set the flash to [On] when the Scene Selection mode is set to [Landscape], [Gourmet], [Pet],
[Beach], [Snow] or [Underwater] (DSC-WX200) mode."

"Cont. Shooting Settings
You can select Single (single-image), Continuous Shooting as the shooting mode.
1. Press (Cont. Shooting Settings) on the control wheel.
2. Select the desired mode with the control wheel.
(Single
Shooting)
The camera shoots a single image.
(Continuous Shooting) The camera shoots up to 10 continuous frames in one burst when you hold down the shutter button.
Notes
is set to [Off].
When recording with the self-timer, a series of up to 10 images is recorded.
When [Continuous Shooting] is selected, [Focus], [White Balance], and [Exposure Compensation]
are adjusted for the first image, and these settings are also used for the other images.
When the internal memory or a memory card is full, the burst stops.
When you perform continuous shooting, [VGA] image size will be set while recording on internal
memory."

"Flash
1. Press (Flash) on the control wheel.
2. Select the desired mode.
(Advanced Flash) Flash automatically operates in dark locations or when the subject is backlit. The ISO
sensitivity is increased in a dark place to shoot a farther distance brighter.
(Auto) Flash automatically operates in dark locations or when there is backlight.
(On) Flash always operates.
(Slow Synchro) Flash always operates.
The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light.
(Off) Flash does not operate."

Source: http://s3.amazonaws.com/szmanuals/7129bf56c3b5fced2efcc9223ac1972e
 
Solution
Status
Not open for further replies.