Trying to resolve wierd crashing/freezing issue

damienhas

Honorable
Feb 6, 2013
8
0
10,510
I recently got back a motherboard that I sent in to RMA after the original board from newegg to gigabyte because the sata ports weren't picking up anything connected to them

I seem to be having a weird freezing/ restart issue that happens at totally random intervals and when it does I usually just restart and its back to normal. I am very sure that its not a cooling issue or connection issue.

One point in time though it froze and when I restarted I got memory beeps.
1) I tested each slot twice, once with each stick of memory, still got beeps.
2) I then tried another separate memory same 4mb but 1333mhz of generic memory still got beeps.
3) I then went back and tried with one of the g. skill and it detected.

This has occurred only once since I've got this board.

My PC specs:
COOLER MASTER HAF 912 Case
GIGABYTE Z77X-UP4TH rev 1.0 Motherboard
EVGA GeForce GTX 660 Ti 2GB Video Card
CORSAIR HX650 Power Supply
Intel Core i5-3570K Processor
8GB (2 x 4GB) DDR3 Memory G.SKill 1600mhz
Seagate Barracuda 1TB HDD
COOLER MASTER Hyper 212 EVO CPU Cooler

Any help in diagnosing this would be most appreciated
 

damienhas

Honorable
Feb 6, 2013
8
0
10,510
1. Using the current bios f9 the other bios is a beta bios should I give it a try?
2. Which option is best in memtest for something like this?
3. How long should I run memtest.
4. I havent heard of hdtune need to check that out
 

damienhas

Honorable
Feb 6, 2013
8
0
10,510
I've was able to do a 8hr blend test session in prime95 with NO ERRORS OR WARNINGS.

I did a sfc scannow and still no errors

A hour and a half later I still get random restart/ 0x101 errors

My current voltages are as thru hardware monitor

vtt.............1.080v
+3.3v.........3.364v
+12v.........12.312v
vin3............2.028v
igpi vaxg.....0.996v
vcore.........1.284v
ddr a+b.......1.50v
3vsb..........3.360v
vbat...........3.192v