Need Help with Performence

stalkingdatoast

Honorable
Jul 29, 2012
63
0
10,630
I have a new build, i did all this myself about 6 month ago. All my computer details are below.

I am having a "Problem" not sure if this is normal or not, I do a lot of video editing , using Sony Vegas pro but mainly Adobe after effect , at the moment the rendering time on a 20 second project is taking my computer 4-6 hours depending on how complicated the project it is. Even when i have a simple project for adobe after effect , the rendering still takes 3-4 hours. I want to find a way to make my computer fast enough to be able to render a lot faster, can someone help me and tell me what should i upgrade on my computer or what else do i need to add?
Any help will be much appreciated

Asus Sabertooth 990FX R2.0
AMD FD8350FRHKBOX FX-8350
16gb 1600 ram
XFX FX-785A-CDFC AMD Radeon HD 7850 Double Dissipation Edition Video Card - 2GB GDDR5
My power supply is 750 watts.
1.5tb harddrive ( not a SSD )
 
Solution
Okay. The choice is then.

Buy a new SSD (min 240 GB, 120 is too small in the long run. Personal experience) as prime and keep your 1,5TB as storage disk.

Or a new HDD with high RPM (Western Digital Black)

Or go full out and buy 2x 240 GB SSD and place them in a Raid0. Then there is no such thing as bottleneck.


Remember to place them in a 6GB/s sata port. (Brown ports on the Sabertooth 990fx)


Dragoic

Honorable
May 5, 2013
164
0
10,710
Your spec look good as far as i can see. I slightly suspect the HDD might bottleneck a little. Is it a Green disk?(Low RPM)

First of all. Could you check for updates to Adobe Aftereffect. I recall i had some issues with Photoshop in the past and Adobe in general from time to time could release some lesser bugged versions.
 

Dragoic

Honorable
May 5, 2013
164
0
10,710
Okay. The choice is then.

Buy a new SSD (min 240 GB, 120 is too small in the long run. Personal experience) as prime and keep your 1,5TB as storage disk.

Or a new HDD with high RPM (Western Digital Black)

Or go full out and buy 2x 240 GB SSD and place them in a Raid0. Then there is no such thing as bottleneck.


Remember to place them in a 6GB/s sata port. (Brown ports on the Sabertooth 990fx)


 
Solution