Solved

NZXT Phantom 530 case fans?

I just built a machine using the NZXT Phantom 530 case.
What I can not figure out to save my life is how do I get the case fans working?

Obviously they need power (I tried turning on the fan control switch)
But I do not see anything to connect to get them working..

help?

Thanks

Tom
2 answers Last reply Best Answer
More about nzxt phantom 530 case fans
  1. Take a look of the power connector of those fans, if they looks similar to this:



    You need to look for the same connector in your motherboard and connect it there.

    In other way, if they looks like this:



    You need to look for that connector type in your PSU and connect it there.
  2. Best answer
    Tom Spyrison said:
    I just built a machine using the NZXT Phantom 530 case.
    What I can not figure out to save my life is how do I get the case fans working?

    Obviously they need power (I tried turning on the fan control switch)
    But I do not see anything to connect to get them working..

    help?

    Thanks

    Tom


    The fans should be pre-installed and pre-connected to the fans hub located at the back of the chassis.

    You need to connect the hub to the PSU using the 4-pin to molex adapter which should be provided with the case cables...

    It should look something like that:

    http://www.hardwarecanucks.com/forum/buy-sell-trade/51838-wanted-aquacomputer-aquaero-5-fan-splitter-fan-hub.html

    Also, check out the manual:

    http://www.nzxt.com/uploads/downloads/manuals/manual_phantom_530.pdf
Ask a new question

Read More

NZXT Cases Components