C canuckboss_92 Honorable Dec 24, 2012 31 0 10,530 Oct 12, 2013 #1 Hi i bought a gtx 650 ti boost 2gb card and it needs two drive bay slotts but im not sure how to remove the cover on the drive bay. I have the dx 4860 gateway pc
Hi i bought a gtx 650 ti boost 2gb card and it needs two drive bay slotts but im not sure how to remove the cover on the drive bay. I have the dx 4860 gateway pc
Solution CepheiA Oct 12, 2013 Wiggle them loose. This was the case with older cases, you have to break them off.
C canuckboss_92 Honorable Dec 24, 2012 31 0 10,530 Oct 12, 2013 #2 I have the case open in front of me now by the way Upvote 0 Downvote
CepheiA Honorable Aug 31, 2013 211 0 10,760 Oct 12, 2013 #3 There should either be screws holding individual slots in place or one large bracket holding all slots in place. Unscrew the necessary screw(s) and remove the slots. Upvote 0 Downvote
There should either be screws holding individual slots in place or one large bracket holding all slots in place. Unscrew the necessary screw(s) and remove the slots.
C canuckboss_92 Honorable Dec 24, 2012 31 0 10,530 Oct 12, 2013 #4 It looks like the indvidual screws and i did unscrew them but the covers seem to be attatched to the case Upvote 0 Downvote
It looks like the indvidual screws and i did unscrew them but the covers seem to be attatched to the case
CepheiA Honorable Aug 31, 2013 211 0 10,760 Oct 12, 2013 Solution #5 Wiggle them loose. This was the case with older cases, you have to break them off. Upvote 0 Downvote Solution