i am rebuilding my computer and i have startup issues. i have a new mobo, anew video card, new hdd, new psu. i put all of it together , go to start up and nothing. all the fans spin for 1 sec and immediately shut off. thought i had too much hooked up for my psu to handle, so i disconnect some things. with only mobo and heatsink fan attached ,no forward progress. still wont start. help me please
start up issues
- Thread starter technot27
- Start date
Solution
didnt work. i doodled with the 8 pin but no luck. ill think about replacing the mobo all together. it has already been replaced 3 times under warranty but if i still get trash back then it doesnt do much good. any other suggestions, im all ears
jbseven
Distinguished
- Dec 2, 2011
- 646
- 0
- 19,160
if you're saying you had initially only connected 4 pins/ no pins to the 8 pin 12v connector on the motherboard then this may be the cause and you may have damaged your motherboard.
This is not conclusive so do try other steps to resolve your issues. This is a good thread and i suggest you work through ALL the steps:
http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
This is not conclusive so do try other steps to resolve your issues. This is a good thread and i suggest you work through ALL the steps:
http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
TRENDING THREADS
-
[SOLVED] Is it safe to use a recapped PSU for a long time ?- Started by zwtch_17
- Replies: 7
-
-
-
-
Discussion What's your favourite video game you've been playing?- Started by amdfangirl
- Replies: 3K
Facebook
Twitter
Instagram