- Apr 4, 2013
- 24
- 0
- 10,520
Hello, my specs:
965be oc 3,8ghz 1,450 vcore
CPU/NB 2000 mhz stock
Ram kingston 2x2 gb 1600mhz cl 9
currently running at 1333 mhz
This is my memory from cpuz log:
Memory Type DDR3
Memory Size 4 GBytes
Channels Dual, (Unganged)
Memory Frequency 671.1 MHz (3:10)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Bank Cycle Time (tRC) 33
Command Rate (CR) 1T
Uncore Frequency 2013.4 MHz
Myp roblem is my cpu is ruunning at high vcore 1,450 and I cant raise up the CPU/NB without raising its voltage, but its already at 1,225.
SO
Iam thinking problem is my memory or something cause Its a quite high voltages that it needs now and I am hoping there is something I can change to ensure stability with current voltage or even maybe lower voltage.
So i was thinking it might be my memory timing or frquency or something.
Please, if someone skilled in these issues can help me. Thank you.
965be oc 3,8ghz 1,450 vcore
CPU/NB 2000 mhz stock
Ram kingston 2x2 gb 1600mhz cl 9
currently running at 1333 mhz
This is my memory from cpuz log:
Memory Type DDR3
Memory Size 4 GBytes
Channels Dual, (Unganged)
Memory Frequency 671.1 MHz (3:10)
CAS# latency (CL) 9.0
RAS# to CAS# delay (tRCD) 9
RAS# Precharge (tRP) 9
Cycle Time (tRAS) 24
Bank Cycle Time (tRC) 33
Command Rate (CR) 1T
Uncore Frequency 2013.4 MHz
Myp roblem is my cpu is ruunning at high vcore 1,450 and I cant raise up the CPU/NB without raising its voltage, but its already at 1,225.
SO
Iam thinking problem is my memory or something cause Its a quite high voltages that it needs now and I am hoping there is something I can change to ensure stability with current voltage or even maybe lower voltage.
So i was thinking it might be my memory timing or frquency or something.
Please, if someone skilled in these issues can help me. Thank you.
Facebook
Twitter
Instagram