- Oct 15, 2013
- 3
- 0
- 10,510
My computer i built was just working fine (few months) and today i took out my gpu and replaced its fan. i put it back in and i turned on the computer and get an error saying "The current BIOS setting do not fully support the boot device. Click OK to enter the BIOS setup."
"Go to Advanced > Boot > CSM Parameters and adjust the CSM (compatibility support module) settings to enable the boot device)" I tried that and no result. I also tried changing the sata settings to ide and still nothing. When i check my sata connections in bios it doesnt show any sata connections at all. When i do put another boot device such as a usb it does detect it but if i put an optical drive via sata it doesnt detect it either. Help is much appreciated im clueless!
"Go to Advanced > Boot > CSM Parameters and adjust the CSM (compatibility support module) settings to enable the boot device)" I tried that and no result. I also tried changing the sata settings to ide and still nothing. When i check my sata connections in bios it doesnt show any sata connections at all. When i do put another boot device such as a usb it does detect it but if i put an optical drive via sata it doesnt detect it either. Help is much appreciated im clueless!
Facebook
Twitter
Instagram