Hello, so I just got a new heat sink and fan today, installed it. I have been wanting to overclock, but haven't due to a lack of good cooling. I wanted to see how this new heat sink and fan would fair so I started it up, and not 10 seconds after I got a blue screen. Can anyone help me out here to try and figure out what exactly happened? My specs are
MoBo: Asus M599X Evo
CPU: AMD FX-6200 Zambezi 6 core 3.8GHz
Heat sink and fan: Xigmatek Gaia SD1283 120mm
Thermal Paste: Arctic MX4
RAM: Corsair Vengeance 16GB (2x8GB)
Video Card: Sapphire Radeon HD 6850 1GB
PSU: Rosewill Xtreme RX750-S-B 750W
Case: Cooler Master HAF 932
SSD: OCZ Agility 3 60GB
HDD: Western Digital 1TB
Not sure if you need all that but figured I'd give you what I have
MoBo: Asus M599X Evo
CPU: AMD FX-6200 Zambezi 6 core 3.8GHz
Heat sink and fan: Xigmatek Gaia SD1283 120mm
Thermal Paste: Arctic MX4
RAM: Corsair Vengeance 16GB (2x8GB)
Video Card: Sapphire Radeon HD 6850 1GB
PSU: Rosewill Xtreme RX750-S-B 750W
Case: Cooler Master HAF 932
SSD: OCZ Agility 3 60GB
HDD: Western Digital 1TB
Not sure if you need all that but figured I'd give you what I have