Sign in with
Sign up | Sign in
Your question
Solved

Coolermaster HAF Xb case with Eisberg Solo

Last response: in Components
Share
October 18, 2013 12:07:47 PM

Hi guys,
Is it possible to fit a 240mm and 120mm rad into the Coolermaster HAF Xb with the Eisberg solo powering a gpu waterblock as well?
Thanks,
Conor

Best solution

October 31, 2013 1:17:16 PM

Hello PsychoGamingLemon,

Yes the Eisberg Solo will work fine with the two radiators and the GPU water block but you might want to be cautious on the thickness of the radiators. If the radiators are too thick then you might have clearance/fitment issues especially with a Push/Pull setup. Aside from the Eisberg Solo, Radiators, and GPU block, you will also need tubing, fittings, distilled water/coolant, and biocide.
Share
October 31, 2013 2:26:25 PM

Hi Patrick,

Thanks for your answer, i've been waiting ages :) 

Is it worth adding another res for more coolant?

Thanks,
Conor
m
0
l
Related resources
October 31, 2013 2:36:24 PM

Dear PsychoGamingLemon,

I apologize for the late response. It's purely preference if you want to add an extra reservoir to the loop.

This reviewer modded the Eisberg with a 360 Rad and an extra reservoir. Again I would just take careful measurements to make sure you have the extra room in the XB.
http://www.youtube.com/watch?v=Ag2XLV0dwn4

Please let me know if you have any more questions.
m
0
l
October 31, 2013 2:44:52 PM

Ok. I will be buying the parts in the near future.

Thanks for all your help,
Conor

P.S my middle name is Patrick lol
m
0
l
October 31, 2013 2:53:37 PM

:)  HAHA that's Great :) 

Please let me know if you have any more questions
m
0
l
!