2 Routers, 1 Switch

DixieLand

Honorable
Oct 18, 2013
2
0
10,510
Hey guys, having a few problems with the network setup at my new job.

Here's the setup we have.

Comcast Cable Modem > Linksys Wireless Router > Switch > another Linksys Wireless Router

All the hardlines and wireless connections coming from the first router / switch are working perfectly. However, when we plug in the second router we aren't getting any internet connectivity. We are getting the signal, but no internet. We have tried changing the Router IP address of the non-functioning Router to no avail.

It is also worth noting that we have Static IP addresses setup for each different device on the network. I don't believe the network itself has a static IP, however.

We have been trying to get this problem resolved for a few weeks now and a solution would be greatly appreciated!

Thanks!
 

DixieLand

Honorable
Oct 18, 2013
2
0
10,510

There is no access point mode in the Linksys E2500 control panel. There is nothing connected to the WAN port.

I'm going to try & change the router's IP address + disable the DHCP as many people have said this works as an alternative to setting the router to Access point.