Multiple Dr Debug Codes on Z87 Extreme4; System Works Perfectly

Apr 6, 2013
42
0
10,540
Build:

Z87 Extreme4
4670k
2x4 Corsair Vengeance Low Profile RAM
212 EVO
GTX 760. HAWK
Sandisk Ultra Plus 120GB
1TB Caviar blue
Random cheap ODD
Corsair HX850


When I boot my PC, I get the following debug codes followed by two short beeps:

15, a2, b2, 4f, 99.

Do they mean something serious? My hardware has worked seemingly perfectly since the day I hooked it up. Didn't realize the beep from the motherboard meant there were errors.

Are they fixable or is something faulty?
 
Solution
yes, there are a few that it will cycle through quickly every time you boot, if one doesn't stay up for good, there isn't an error. The beep is weird though, i'm not a fan of motherboard speakers, so i don't put them on, but that'd be my suggestion if you don't have a persistent error code and the boot beep is supposed to be turned off...

Jaxem

Honorable
Dr. Debug always runs through a few codes on startup no matter what, if it sticks on one and stays there, then you need to start worrying and get out your manual. If you have a motherboard speaker hooked up, it's probably just beeping on boot, not necissarily and error, you can usually turn off boot beeps in the bios...if you're not getting a code to stay on the Dr. then you're fine.
 
Apr 6, 2013
42
0
10,540


Unfortunately, a2, b2 and 4f all persist, not so sure about the numbers. I don't see any explanation in the user manual and in the online FAQ, I don't see 4f and b2 anywhere. a2 should be a SATA problem, but all my SATA devices work. I'm confused.

EDIT: I have boot beep disabled, so pretty sure it is an error.
EDIT: Oh, so if the codes do not persist after the boot, I am okay? Or did I understand it wrong..
 

Jaxem

Honorable
yes, there are a few that it will cycle through quickly every time you boot, if one doesn't stay up for good, there isn't an error. The beep is weird though, i'm not a fan of motherboard speakers, so i don't put them on, but that'd be my suggestion if you don't have a persistent error code and the boot beep is supposed to be turned off...
 
Solution