Hello internet.
I recently build my own new gaming PC, but i have a problem installing my OS.
When i turn it on (with my Windows 8 disc in the optical drive), i see a menu from my Gigabyte (my motherbord) and i can choose between
''DEL (BIOS SETUP/Q-FLASH)''
''F9 (PC information)
''F12 (bootup menu)
''END (Q-Flash)
If i press F12, i can choose between 4 boot devices:
-Realtek PXE B03 D00
-SATA PM: HL-DT-ST-DVDRAM GH24
-SATA SM: STA1000DM003-1CH162
-SATA PS: KINGSTON SV300S37A12
-Enter setup
If i choose any of these option (exept for ''Enter setup'') I get this:
Intel UNDI, PXE-2.1 (build 083)
Copyright (C) 1997-2000 Intel Corporation (I find this really weird since i have a AMD processor)
This product is covered by one or more of the following patens : (insert random letters and numbers here)
Realtek PCIe GBE Family Controller Series v2.50 (09/26/12)
PXE-E61 Medie test failure, check cable
PXE-M0F : Exiting PXE ROM.
After a few seconds, this appears:
Reboot and select proper boot device or insert boot media in selected boot device and press a key
If i choose ''enter setup'' i get a black screen and it stays black.
My menu looks similiar to this:
http://www.youtube.com/watch?v=YvK_htAOWr8
Does someone know how i can install my OS?
Thanks!
I recently build my own new gaming PC, but i have a problem installing my OS.
When i turn it on (with my Windows 8 disc in the optical drive), i see a menu from my Gigabyte (my motherbord) and i can choose between
''DEL (BIOS SETUP/Q-FLASH)''
''F9 (PC information)
''F12 (bootup menu)
''END (Q-Flash)
If i press F12, i can choose between 4 boot devices:
-Realtek PXE B03 D00
-SATA PM: HL-DT-ST-DVDRAM GH24
-SATA SM: STA1000DM003-1CH162
-SATA PS: KINGSTON SV300S37A12
-Enter setup
If i choose any of these option (exept for ''Enter setup'') I get this:
Intel UNDI, PXE-2.1 (build 083)
Copyright (C) 1997-2000 Intel Corporation (I find this really weird since i have a AMD processor)
This product is covered by one or more of the following patens : (insert random letters and numbers here)
Realtek PCIe GBE Family Controller Series v2.50 (09/26/12)
PXE-E61 Medie test failure, check cable
PXE-M0F : Exiting PXE ROM.
After a few seconds, this appears:
Reboot and select proper boot device or insert boot media in selected boot device and press a key
If i choose ''enter setup'' i get a black screen and it stays black.
My menu looks similiar to this:
http://www.youtube.com/watch?v=YvK_htAOWr8
Does someone know how i can install my OS?
Thanks!