Hi, I'm building my PC with the following configuration
MB : ASUS Z87-DELUXE/DUAL DDR3 1600 LGA 1150 Motherboard
CPU : Intel Core i7-4770K Quad-Core Desktop Processor 3.5 GHZ 8 MB Cache BX80646I74770K
Memory : Corsair Vengeance Pro 32GB (4x8GB) DDR3 1866 MHz (PC3 15000) Desktop
GPU : Gigabyte GTX 770 GDDR5-4GB 2xDVI/HDMI/DP OC WINDFORCE 3X Graphics Card GV-N770OC-4GD
Power supply : Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i
SSD : Samsung MZ-7TD250BW 840 Series Solid State Drive (SSD) 250 GB Sata 2.5-Inch
HDD : Western Digital WD1002FAEX Caviar Black 1 TB SATA III 7200 RPM 64 MB Cache Internal Desktop 3.5" Hard Drive
Monitor : Asus MX239H, 23-Inch Full HD AH-IPS LED-backlit and Frameless Monitor
However I have a big issue when I power up everthing I don't have any video output from HDMI ports (neither from the motherboard nor the graphic card port). I built several PCs previously but I don't know what to do if I can't access the BIOS.
There are Q-code LEDs on the MB, they are always at 00 (which means 'not used'). All the POST state leds are off (DRAM_LED, CPU_LED, VGA_LED and BOOT_DEVICE_LED).
Obviously I double checked the power and data cables (including the HDMI cable).
So right now, I trying to get something on my screen other than 'no signal'. If you heard of similar problems or have any advice/idea, I will glad to hear.
Thank you.
Mat
MB : ASUS Z87-DELUXE/DUAL DDR3 1600 LGA 1150 Motherboard
CPU : Intel Core i7-4770K Quad-Core Desktop Processor 3.5 GHZ 8 MB Cache BX80646I74770K
Memory : Corsair Vengeance Pro 32GB (4x8GB) DDR3 1866 MHz (PC3 15000) Desktop
GPU : Gigabyte GTX 770 GDDR5-4GB 2xDVI/HDMI/DP OC WINDFORCE 3X Graphics Card GV-N770OC-4GD
Power supply : Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i
SSD : Samsung MZ-7TD250BW 840 Series Solid State Drive (SSD) 250 GB Sata 2.5-Inch
HDD : Western Digital WD1002FAEX Caviar Black 1 TB SATA III 7200 RPM 64 MB Cache Internal Desktop 3.5" Hard Drive
Monitor : Asus MX239H, 23-Inch Full HD AH-IPS LED-backlit and Frameless Monitor
However I have a big issue when I power up everthing I don't have any video output from HDMI ports (neither from the motherboard nor the graphic card port). I built several PCs previously but I don't know what to do if I can't access the BIOS.
There are Q-code LEDs on the MB, they are always at 00 (which means 'not used'). All the POST state leds are off (DRAM_LED, CPU_LED, VGA_LED and BOOT_DEVICE_LED).
Obviously I double checked the power and data cables (including the HDMI cable).
So right now, I trying to get something on my screen other than 'no signal'. If you heard of similar problems or have any advice/idea, I will glad to hear.
Thank you.
Mat