Sign in with
Sign up | Sign in
Your question
Solved

help on overclocking amd athlon 64 x2 dual core processor 4600+ 2.40 Ghz

Last response: in Overclocking
Share
October 24, 2013 11:41:37 AM

hello i want to know if i can overclock my processor at like (2.8-3.1) but im doing it because im build my self a computer but with the same processor here is stuff im getting:

SilenX EFZ-92HA2 92mm 3rd generation fluid dynamic bearing Effizio CPU Cooler link:http://www.newegg.com/Product/Product.aspx?Item=N82E168...

ASRock A785GM-LE AM3/AM2+/AM2 AMD 785G Micro ATX AMD Motherboard
link:http://www.newegg.com/Product/Product.aspx?Item=N82E168...

MSI N630GT-MD2GD3 GeForce GT 630 2GB 128-bit DDR3 PCI Express 2.0 x16 HDCP Ready Video Card
link:http://www.newegg.com/Product/Product.aspx?Item=N82E168...

4gb of ram

Corsair 550 Watts PSU
Anonymous
October 25, 2013 6:27:12 AM

It depends on which revision and which socket you have. Download CPU-Z and make sure your cpu socket is AM2 and not 939. If you have a 90nm cpu, you could probably get it up to 2.7 or 2.8. If you have a 65nm one, you could probably kick it to 3.0 or 3.2.

I would actually look up an Asus m4a785-m on ebay, it should be the same price as the Asrock, and is much more stable and better for OC'ing.
m
0
l
October 25, 2013 3:07:18 PM

Anonymous said:
It depends on which revision and which socket you have. Download CPU-Z and make sure your cpu socket is AM2 and not 939. If you have a 90nm cpu, you could probably get it up to 2.7 or 2.8. If you have a 65nm one, you could probably kick it to 3.0 or 3.2.

I would actually look up an Asus m4a785-m on ebay, it should be the same price as the Asrock, and is much more stable and better for OC'ing.


okay i have am2 and its 90nm cpu so i could make it 2.8
m
0
l

Best solution

Anonymous
October 26, 2013 11:49:57 AM

yes, remember to download a stress test program and a temperature monitor, increase the fsb +1, reboot, and stress test it for at least 30 minutes. Temps shouldn't go over 55C. If it gets instable you can bump down the ram speed, and try to keep the "HT" speed close to default(probably 800mhz) as possible.

A good stress tester is Prime95, and a good temp monitor is Speedfan, although a lot of people use HWmon.
Share
!