- Jun 9, 2013
- 22
- 0
- 10,510
So today I installed a new cooler Cooler Master HYPER 212X on my AMD FX 8350.
After setting up everything I powered on my CPU but nothing was on the monitor. The CPU starts up, no beeps, nothing.
Later I got to know that while removing the stock cooler my brother removed it all at once, yeah, the CPU chip too, ALL AT ONCE. Then I somehow managed to straighten up the bent pins and firmly placed it. Then installed the cooler normally.
My specs are--
AMD FX 8350
Seasonic 520 W PSU
8GB HyperX Kingston RAM
Sapphire 7770 1GB DDR5
Cooler Master Hyper 212X (installed it today itself)
After setting up everything I powered on my CPU but nothing was on the monitor. The CPU starts up, no beeps, nothing.
Later I got to know that while removing the stock cooler my brother removed it all at once, yeah, the CPU chip too, ALL AT ONCE. Then I somehow managed to straighten up the bent pins and firmly placed it. Then installed the cooler normally.
My specs are--
AMD FX 8350
Seasonic 520 W PSU
8GB HyperX Kingston RAM
Sapphire 7770 1GB DDR5
Cooler Master Hyper 212X (installed it today itself)
Facebook
Twitter
Instagram