ASROCK Z87 Extreme 6 GPU issues

Howza83

Honorable
Sep 12, 2013
12
0
10,510
Hi

I just bought the Extreme 6 and keep getting '62' come up on the mother board when I try to install my GPU's. The system runs fine when I use the cpu gpu. I have two 6970 GPUs.

Any time I put either into the PCIe2 slot it comes up with the error.

When I put it in the PCIe3 slot it will sometimes it will work fine, however, sometimes I have to reset the cmos (I remove the battery). Sometimes it just comes up with the error and doesn't boot.

Sometimes I have random success with a gpu in the first slot but the monitor shows lines through the screen and then after a min or two it just goes black.

I have swapped the GPU's about and used different power cord combinations, however, I keep getting the same error 62.

I have booted the system by setting the CPU GPU as primary. I have then booted into the bios and looked at the screen that shows what is plugged in where and both GPU's are showing.

Any help would be very appreciated!

CPU: 4670K
GPU: 2x 6790K
MEM: Kingston 1333
PSU: Enermax Revolution 87+ 1000W
HD: Kingston 120gig SSD
 

Howza83

Honorable
Sep 12, 2013
12
0
10,510
In addition the debug codes for 62 says "Installation of the South Bridge Runtime Services" and the Dr Debug "61 - 91 - Chipset initialization error. Please press reset or clear CMOS."
 

TRENDING THREADS