What do I need to do before replacing mobo? (temporary)

kanade

Honorable
Oct 9, 2013
22
0
10,510
There is a problem with my current mobo (Gigabyte GA-P55A-UD3 rev2.0) and as a result I need to RMA it which according to Gigabyte's rep it will take a week or so to get it fixed and delivered.

While waiting for my mobo, my friend will let me borrow his old mobo (Gigabyte GA-H55M-UD2H;I'm not sure which revision http://www.gigabyte.com/products/product-page.aspx?pid=3309#ov or http://www.gigabyte.com.au/products/product-page.aspx?pid=3503#ov) because it has the matching chipset for CPU. I'll be using his mobo until my newly fixed mobo arrives.

With that being said, what do I need to do before replacing the mobo? I have little to no knowledge of what to do at this stage though luckily, my friend will be able to replace/install the mobos for me so for the physical installation everything will be okay (hopefully).
However, as for software/desktop stuff I'm not really sure what to do. My friend said he will take care of it though I feel like he will "miss" something and as a result "might" cause a problem in future.
If it's something like such as replacing video cards where you only need to delete the driver and install the right driver for the card, I'd like to handle it before my friend does it.

Also, if possible I'd like to get some answers for these questions as well:
- What will happen to my keyboard/mouse drivers, display drivers, VPN adapter, soundcard etc? Will they work just as normal on the old mobo?
- While using my friend's old mobo, am I able to continue using it like I normally do such as gamings, watching, desktop activities etc?
- When I receive my original/fixed mobo, does the installing/replacing method (both external and internal) applies same as how the old mobo was installed?

Thank you, help would be appreciated it.
 
Solution
Being a similar chipset and from the same manufacturer, it's most likely that Windows will install again (might need to have that mobo's cd ready) the correct drivers, however it would be better at the first startup to boot into safe mode so windows won't load the drivers from your currently RMA'ed mobo.

Every USB device will be reinstalled automatically when plugged, soundcard (if integrated) might need the mobo CD, VPN adapter should work directly.

Yes, you should be able to use the pc for everything you're used to use it.

The same procedure should be used when installing the new mobo when it arrives.


Before doing all this it would be a good idea to make an image of your c:\ drive with Acronis True Image or Norton Ghost just in...
What operating system are you using? Sometimes the OS is bound to the motherboard which means you will have to reinstall the OS and all your programs with a motherboard swap, sometimes you don't have to but be prepared for it.

If that is the case you will obviously need to reinstall everything. If not then your keyboard mouse etc... should work normally.
 
Being a similar chipset and from the same manufacturer, it's most likely that Windows will install again (might need to have that mobo's cd ready) the correct drivers, however it would be better at the first startup to boot into safe mode so windows won't load the drivers from your currently RMA'ed mobo.

Every USB device will be reinstalled automatically when plugged, soundcard (if integrated) might need the mobo CD, VPN adapter should work directly.

Yes, you should be able to use the pc for everything you're used to use it.

The same procedure should be used when installing the new mobo when it arrives.


Before doing all this it would be a good idea to make an image of your c:\ drive with Acronis True Image or Norton Ghost just in case something doesn't go well when using the temporary mobo (use that mobo but boot directly to Acronis/Norton Ghost to make the image, then restart and enter windows in safe mode as described before).
 
Solution

kanade

Honorable
Oct 9, 2013
22
0
10,510


My OS is Windows 7 Ultimate 64bit service pack 1.

 

kanade

Honorable
Oct 9, 2013
22
0
10,510


Thank you for the infos.

It seems like a good idea to make an image of my c drive in case something bad happens.

With that being said, if there are no other precautionary step we'd need to take before swapping the mobo I guess everything is alright and good to go.