2x4 12V Power Connector
- Thread starter skiyyard
- Start date
blackjackedy
Distinguished
- Feb 15, 2010
- 151
- 0
- 18,710
I just lloked up a picture of your board and it appears to have an 8pin EPS connector, which lookd like 2 4pins right next to each other.
If you have an 8pin EPS connector on you power supply, use it. It will most likely look like 2 4 pins that are detached slightly up on the same cabling, just plug them both in next to each other. If not, the 4 pin that will be there instead will work fine as EPS is really only nessesary for very high draw CPUs.
If you have an 8pin EPS connector on you power supply, use it. It will most likely look like 2 4 pins that are detached slightly up on the same cabling, just plug them both in next to each other. If not, the 4 pin that will be there instead will work fine as EPS is really only nessesary for very high draw CPUs.
TRENDING THREADS
-
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 17
-
-
Question Can I plug a docking station to a USB-C 2.0 port to have video output?- Started by jameli
- Replies: 2
Facebook
Twitter
Instagram