Switched to onboard APU graphics but it seemed to lag processor??
- Thread starter Jason H.
- Start date
Solution
- Oct 20, 2013
- 1,765
- 113
- 20,540
I think that MIGHT solve the problem Im using two dif kind of chips (1 is 2gb 1 is 4 gb.. so 6 gb all together.. I know for sure the 2 gb is 1333, not too sure what the 4 gb is but I know it has to be higher because the chip is all kool lookin with like plating covering the chip) here is the CPUz report of my memory .. I was once told since Im using 2 dif types of ram that my ram is runnning in single thread mode? idk what this means really.
DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Micron Technology (2C00000000000000)
Size 2048 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number 16JTF25664AY-1G4D1
Serial number DB3BD9CD
Manufacturing date Week 20/Year 09
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 5.0-5-5-14-19 @ 380 MHz
JEDEC #2 6.0-6-6-17-23 @ 457 MHz
JEDEC #3 7.0-7-7-20-27 @ 533 MHz
JEDEC #4 8.0-8-8-22-30 @ 609 MHz
JEDEC #5 9.0-9-9-25-34 @ 685 MHz
JEDEC #6 10.0-10-10-28-38 @ 761 MHz
DIMM # 2
SMBus address 0x51
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Team Group Inc. (7F7F7F7FEF000000)
Size 4096 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number Team-Elite-1333
Manufacturing date Week 29/Year 13
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 5.0-5-5-14-19 @ 380 MHz
JEDEC #2 6.0-6-6-17-23 @ 457 MHz
JEDEC #3 7.0-7-7-20-27 @ 533 MHz
JEDEC #4 8.0-8-8-22-30 @ 609 MHz
JEDEC #5 9.0-9-9-25-34 @ 685 MHz
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 14
Facebook
Twitter
Instagram