Is my Cooler Master Hyper T4 working as it should ?

Toggle sidebar Toggle sidebar
K

kejdikola

Honorable
Nov 22, 2012
9
0
10,510
My system specs are:
AMD FX 6300 @stock 3.5GHZ
Motherboard: Asrock n68c gs-fx
GPU: XFX R7870
RAM: Kingston Hyperx 8gb 1600mhz.
So I received my cooler Master Hyper T4 today and installed it using the thermal paste that came in the package. Before installing this cooler I had the stock cooler and I was getting these temps:
Idle : 30-34 C
Full load using prime95: 60-63 C

Now using this aftermarket cooler I get these temps:
Idle: 28-32 C
Full load using prime95: 48-51 C

So is my cooler working as it should ? Maybe I applied too much thermal paste or not a good one ?
 
Sort by date Sort by votes
lazyboy947

lazyboy947

Splendid
Jun 11, 2012
2,749
0
21,460
well the T4 is better than the stock cooler obviously dropped ur load temps by 12c, but its basically a thinner version of the hyper 212 evo/+. So either thats how it performs, or u may have not cleaned the old paste off to well, or if paste didnt come pre applied then applied too much or too little, or the cooler didnt seat well. If u have some extra paste then id try taking it off and seeing whats the problem, but current temps seem fine if u dont have paste to re apply at this very moment.
 
Upvote 0 Downvote
K

kejdikola

Honorable
Nov 22, 2012
9
0
10,510


I already did that causr I had some thermal paste around and it didnt change anything. You think this cooler can perform better than this? I didnt go for the hyper 212 evo because it wouldnt fit in my case ( fractal design core 1000)
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom