Overclocking FX-6100 At 4GHz

Toggle sidebar Toggle sidebar
G

Guest

Guest
Hello, so I have a FX-6300 and I would like to overclock it to 4Ghz at least if not more. I know that this cpu has turbo core but you cannot control it.

So what would I have to do to overclock, just increase voltage and multiplier?
Run Prim95 and test temperatures?

My specs are:
OS- Windows 7 64 Bit
Motherboard- Gigabyte 78LMT USB 3
Graphics Card: GTX 650 1GB
RAM- RIPJAWS 8GB
CPU- AMD FX 6-CORE Black Edition 3.3Ghz
 
Solution
koreanoverlord
Disable CnQ, C1E, APM, and SVM. Enable HPM.

Up the multiplier, run P95, check vcore and temps... if no errors repeat.

If you get an error either up the vcore or lower your multiplier.

Make sure you look up what temps and voltage your cpu can take. If your vcore is dropping under load you can turn on Load Line Calibration to compensate for it it, be wary because it can jump past your vcore setting. Overvolting you CPU will fry it.
Sort by date Sort by votes
koreanoverlord

koreanoverlord

Honorable
Mar 6, 2013
644
0
11,360
Disable CnQ, C1E, APM, and SVM. Enable HPM.

Up the multiplier, run P95, check vcore and temps... if no errors repeat.

If you get an error either up the vcore or lower your multiplier.

Make sure you look up what temps and voltage your cpu can take. If your vcore is dropping under load you can turn on Load Line Calibration to compensate for it it, be wary because it can jump past your vcore setting. Overvolting you CPU will fry it.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom