Hello, I am a first time builder. Recently I received my parts and I began building my computer. After completely building my computer, I finally tested it out and all the fans,led,hard drive,optical drive and CPU Heatsink began lighting up or spinning. Unfortunately, I never tested my core components(CPU,RAM,Motherboard,Power Supply) prior to when I put them in the case. Once I found out that the screen wasn't showing up, I removed the motherboard(which had the CPU and RAM mounted on it) from the case and started to diagnose the problem. Sadly, i never found out the problem and that is why I am asking the community for help. I also have a Case speaker but do not where to put it on the motherboard since it is not listed in the Manual.
My Parts are
A8-6600k
MSI FM2-A55M-E33
Lepa N500 500 watt power supply(comes with a 24 pin Motherboard Cable and a 4+4 pin CPU cable(Does it matter which CPU cable I use since this Motherboard has only one 4 port cable?))
WD Blue 1TB
Lite On DVD burner
Rosewill FBM-01 case
Vision Tek RAM 1866mhz DDR3 4GB(2x2)
I haven't tried reseting the CMOS yet, since i don't know what it does or where to find it on the Motherboard.
Here is some Pictures:
My Parts are
A8-6600k
MSI FM2-A55M-E33
Lepa N500 500 watt power supply(comes with a 24 pin Motherboard Cable and a 4+4 pin CPU cable(Does it matter which CPU cable I use since this Motherboard has only one 4 port cable?))
WD Blue 1TB
Lite On DVD burner
Rosewill FBM-01 case
Vision Tek RAM 1866mhz DDR3 4GB(2x2)
I haven't tried reseting the CMOS yet, since i don't know what it does or where to find it on the Motherboard.
Here is some Pictures:
Facebook
Twitter
Instagram