can ATI radeon HD 5870 DDR5 work with motherboard using Ram ddr3 bus 1066 ?

Toggle sidebar Toggle sidebar
N

Ntvideo

Honorable
Nov 5, 2013
1
0
10,510
can vga card ATI radeon HD 5870 DDR5 work on motherboard using ram ddr3 bus 1066 ?
when i finish fixing the card on the above Motherboard, power on ,the system could not run,just
create loud beep sounds ,no signal on the screen
 
Solution
smorizio
make sure you plugged in the cpu power plug into the mb. some mb it a 4/8 pin plug near the cpu or on the edge of the mb. also check the number of beeps...see if it ram or gpu issue. if your mb is a newer unit see if it has onboard gpu if it does use that one first to see if the system is booting fine.
Sort by date Sort by votes
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
make sure you plugged in the cpu power plug into the mb. some mb it a 4/8 pin plug near the cpu or on the edge of the mb. also check the number of beeps...see if it ram or gpu issue. if your mb is a newer unit see if it has onboard gpu if it does use that one first to see if the system is booting fine.
 
Upvote 0 Downvote
Solution
Nuck Chorris

Nuck Chorris

Honorable
Feb 26, 2013
344
0
10,810
Have you plugged the 6 pin power connector?
How many ram sticks do you have?
if you have two, plug the other one out (RAM 1) and then boot, if it didn't, plug it back (RAM 1) and then plug the other one out (RAM 2). Then boot.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom