Have a new Z87 PRO4 MB.
I installed G.Skill memory, 16GB (2x8GB) #F3-12800CL10D-16GBXL.
The BIOS is reporting that it is in dual channel mode, but that it has only 4GB (2x2GB) installed.
"2048 667MHZ (DDR3-1333) 9-9-9-24"(twice)
I know that F3-12800CL10D-16GBXL is not on the compatibility list for the MB, but F3-12800CL10Q-32GBXL is, and G.Skill explicitly lists the Z87-PRO4 as being compatible with #F3-12800CL10D-16GBXL.
My understanding is that the two are of the same spec with the single exception that the latter is 4x8 instead of 2x8.
Do I really need to pull out the F3-12800CL10D-16GBXL and replace it with something else?
Or is there some other setting or configuration I should try to get it to see all 16GB?
I have tried putting the memory in slots 0 & 2, as well as in 1 & 3.
ANY thoughts, ideas, or suggestions would be greatly appreciated.
-Gary
I installed G.Skill memory, 16GB (2x8GB) #F3-12800CL10D-16GBXL.
The BIOS is reporting that it is in dual channel mode, but that it has only 4GB (2x2GB) installed.
"2048 667MHZ (DDR3-1333) 9-9-9-24"(twice)
I know that F3-12800CL10D-16GBXL is not on the compatibility list for the MB, but F3-12800CL10Q-32GBXL is, and G.Skill explicitly lists the Z87-PRO4 as being compatible with #F3-12800CL10D-16GBXL.
My understanding is that the two are of the same spec with the single exception that the latter is 4x8 instead of 2x8.
Do I really need to pull out the F3-12800CL10D-16GBXL and replace it with something else?
Or is there some other setting or configuration I should try to get it to see all 16GB?
I have tried putting the memory in slots 0 & 2, as well as in 1 & 3.
ANY thoughts, ideas, or suggestions would be greatly appreciated.
-Gary
Facebook
Twitter
Instagram