Packkard Bell L5871 Service Manual

torley

Honorable
Nov 6, 2013
2
0
10,510
A family member has a Packard Bell OneTwo L l5871 UK all in one desktop which recently stopped booting. The problem stopping it from booting is a bad sector on the hard disk which should be a pretty easy fix (replace the hard drive) only thing is I can't find any way of getting into it.

Does anyone know how I would find a service manual for this device, Packard Bell only have a basic setup guide on their website, or better yet some advice on how it opens up?

Here's a link to the model, http://www.packardbell.co.uk/pb/en/GB/content/model/DO.U6PEK.009.

Thanks in advance for any help.
 

g-unit1111

Titan
Moderator
Yeah it sounds like replacing the hard drive is easy but you will need a valid license for your operating system before you proceed. I can't think that it would be anything more than using a standard philips head scerwdriver and screwing off the side panel.
 

torley

Honorable
Nov 6, 2013
2
0
10,510


Hi g-unit1111. Thanks for that, the Hard Disk is definitely at fault I know that. The problem is that there is no access to the components, it is an all-in-one with a grand total of two screws on the back and no discernible clips that I can find.