So since I built my computer I have been getting interference lines in my screen from my 650ti Boost through DVI->VGA-> Monitor
Just a couple minutes ago I tried to play with wiring and change sockets for my PSU and monitor, as well as reseating the GPU but when I went to start the computer it didn't boot, monitor went to standby and I got no beeps from the internal speaker.
Another Issue I've been receiving is random BSOD's when I leave the computer off for a period of time, this is the only time it will blue screen, it will not throw a blue screen after a simple restart, but only if the computer is off for a period of time.
My question is, what should I look at to be the culprit, sadly I do not have another PSU to test to see if mines bad so I'd like to try and eliminate other things first.
Asus GTX 650TI Boost 2GB
Cooler Master Extreme 2 525W PSU
Apevia X Hermes Green ATX tower
Gigabyte 970A-D3P
G Skill Sniper 1866 2x4GB
FX-6300 6 Core processor
Just a couple minutes ago I tried to play with wiring and change sockets for my PSU and monitor, as well as reseating the GPU but when I went to start the computer it didn't boot, monitor went to standby and I got no beeps from the internal speaker.
Another Issue I've been receiving is random BSOD's when I leave the computer off for a period of time, this is the only time it will blue screen, it will not throw a blue screen after a simple restart, but only if the computer is off for a period of time.
My question is, what should I look at to be the culprit, sadly I do not have another PSU to test to see if mines bad so I'd like to try and eliminate other things first.
Asus GTX 650TI Boost 2GB
Cooler Master Extreme 2 525W PSU
Apevia X Hermes Green ATX tower
Gigabyte 970A-D3P
G Skill Sniper 1866 2x4GB
FX-6300 6 Core processor
Facebook
Twitter
Instagram