- Jun 3, 2008
- 15
- 0
- 18,510
I have an old pc in the cupboard that I will give to my Brother, he doesnt game so it will do him just fine.
E6600
2.5GB DDR2 533Mhz
nvidia 800gts 640mb
Abit Fatal1ty FP-IN9 SLI
Heres the thing , I have some 800Mhz sticks that I can add too the m/board , would there be any issues if this was the setup memory wise.. ?
2gb 800/2gb 800/2gb 800/1gb 533
--------
Plus, just out of curiousity can you answer this...,
The abit m/board booklet has the following info...
Memory
4 X 240-pin DIMM sockets support max. memory capacity 32GB
Supports Dual channel DDR2 800/667/533 Un-buffered Non-ECC memory
It states the highest speed ram that it can run is 800.
I had a look on crucial.com and it states that under compatible memory , that 1066mhz will work on the board ???
Part Number: CT2KIT25664AA1067
Module Size: 4GB kit (2GBx2)
Package: 240-pin DIMM
Feature: DDR2 PC2-8500
Specs: DDR2 PC2-8500 • CL=7 • Unbuffered • NON-ECC • DDR2-1066 • 1.8V • 256Meg x 64 •
Is the above a mistake on crucial's part ?
Also the booklet says the the board can run cpu's at speeds of 533/800/1066/1333
Im no expert , but should memory speed and cpu speed match, if so , would the board handle memory speeds of ddr2 1333mhz ???
Thanks for any opinions !
E6600
2.5GB DDR2 533Mhz
nvidia 800gts 640mb
Abit Fatal1ty FP-IN9 SLI
Heres the thing , I have some 800Mhz sticks that I can add too the m/board , would there be any issues if this was the setup memory wise.. ?
2gb 800/2gb 800/2gb 800/1gb 533
--------
Plus, just out of curiousity can you answer this...,
The abit m/board booklet has the following info...
Memory
4 X 240-pin DIMM sockets support max. memory capacity 32GB
Supports Dual channel DDR2 800/667/533 Un-buffered Non-ECC memory
It states the highest speed ram that it can run is 800.
I had a look on crucial.com and it states that under compatible memory , that 1066mhz will work on the board ???
Part Number: CT2KIT25664AA1067
Module Size: 4GB kit (2GBx2)
Package: 240-pin DIMM
Feature: DDR2 PC2-8500
Specs: DDR2 PC2-8500 • CL=7 • Unbuffered • NON-ECC • DDR2-1066 • 1.8V • 256Meg x 64 •
Is the above a mistake on crucial's part ?
Also the booklet says the the board can run cpu's at speeds of 533/800/1066/1333
Im no expert , but should memory speed and cpu speed match, if so , would the board handle memory speeds of ddr2 1333mhz ???
Thanks for any opinions !
Facebook
Twitter
Instagram