Hi,
I recently purchased a new build and have an Asus 787-Pro Motherboard. When I plug in the 24 pin only on an external build, the CPU fan and the GPU fans both run. However, when I plug in to the EATX 12V 8 pin, with either 4 pins or 8, the motherboard will briefly turn on and then back off. There is also a defect in that I am not able to see anything when my GPU is connected to my monitor or from the motherboard's onboard plug. I've tried multiple changes to the EATX 12V, with using 4 and 8 pins but only to the same results. I have tried looking up this problem but I am not getting any positive results. Any suggestions or thoughts on how to rectify this situation.
Here are my parts:
PSU: XFX Pro 850W
GPU: EVGA Geforce GTX 770 2gb
Memory: G.Skill Sniper 2x4 8gb 1866mhz
CPU: Intel Core i5 4670K
Heatsink: Stock intel fan/heatsink
I recently purchased a new build and have an Asus 787-Pro Motherboard. When I plug in the 24 pin only on an external build, the CPU fan and the GPU fans both run. However, when I plug in to the EATX 12V 8 pin, with either 4 pins or 8, the motherboard will briefly turn on and then back off. There is also a defect in that I am not able to see anything when my GPU is connected to my monitor or from the motherboard's onboard plug. I've tried multiple changes to the EATX 12V, with using 4 and 8 pins but only to the same results. I have tried looking up this problem but I am not getting any positive results. Any suggestions or thoughts on how to rectify this situation.
Here are my parts:
PSU: XFX Pro 850W
GPU: EVGA Geforce GTX 770 2gb
Memory: G.Skill Sniper 2x4 8gb 1866mhz
CPU: Intel Core i5 4670K
Heatsink: Stock intel fan/heatsink