z77extreme4 d6 error no display

Toggle sidebar Toggle sidebar
D

Dinocookies

Honorable
Nov 9, 2013
13
0
10,520
Hello yesterday I alt tabbed out of a program and when I did my monitor lost signal. I later rebooted and I could hear it booting into windows but there was no display. I took out my gpu and tried the onboard gpu but that dint work either. I reseated the ram,cpu,and gpu and I'm still not getting a signal. I tried my psu,gpu,ram and cpu On my other computer and they all worked fine. Do you guys think I need to get a new motherboard? The mobo displaying a d6 error.
*update* I also cleared the cmos.

Spec :
Cpu - i7-3770k
Gpu - Msi gtx 680 lightning
Mobo - asrock z77 extreme 4
Ram - gskill sniper 1866
 
Solution
Faruk Aksamija
About the debug code shows "D6", it maybe caused by your VGA card.
System cannot recognize your VGA card, so the system cannot boot normally.

Please kindly refer to below suggestions for testing.
1. Reinstall your VGA card and check the power connector of the VGA card is connected correctly.
2. Use eraser to clean the golden finger of VGA card to try.
3. Please press "F9" to load BIOS default settings and adjust "Primary Graphics Adapter" to [PCI Express] to try.
4. If possible, please kindly install your VGA card to another motherboard to try.

If the problem still cannot be solved, please kindly contact your local dealer to check your system.
Sort by date Sort by votes
D

Dinocookies

Honorable
Nov 9, 2013
13
0
10,520

I tried it in both pcie slots still not working.

 
Upvote 0 Downvote
Faruk Aksamija

Faruk Aksamija

Honorable
Sep 25, 2013
192
0
10,760
About the debug code shows "D6", it maybe caused by your VGA card.
System cannot recognize your VGA card, so the system cannot boot normally.

Please kindly refer to below suggestions for testing.
1. Reinstall your VGA card and check the power connector of the VGA card is connected correctly.
2. Use eraser to clean the golden finger of VGA card to try.
3. Please press "F9" to load BIOS default settings and adjust "Primary Graphics Adapter" to [PCI Express] to try.
4. If possible, please kindly install your VGA card to another motherboard to try.

If the problem still cannot be solved, please kindly contact your local dealer to check your system.
 
Upvote 0 Downvote
Solution
D

Dinocookies

Honorable
Nov 9, 2013
13
0
10,520

The bios are 2.90. I've been messing around with it for a couple of hours and now the top pcie slot is working. The bottom one is still not working any ideas?
 
Upvote 0 Downvote
G

Guest

Guest


We have the same bios. What did u put at the bottom pci-e slot?
I dont have any problem with both pcie slot, when i used crossfire before.
 
Upvote 0 Downvote
G

Guest

Guest


Ah Ok, sometimes you need to re seated the gpu, and sli or crossfire cable coz sometimes theres an error.
also the cable of gpu.
 
Upvote 0 Downvote
D

Dinocookies

Honorable
Nov 9, 2013
13
0
10,520

Ya tried all that this moring but no luck. Thanks for all the advice tho.
 
Upvote 0 Downvote
G

Guest

Guest


Ok, no problem... I think RMA is better solution. :)
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom