New build, hard drive not being recognized

kcripe

Honorable
Nov 10, 2013
3
0
10,510
Hard drive is not showing in BIOS, SSD works fine. Ive tried different SATA power cables and still nothing. Also tried switching SATA mobo port for the hard drive still nothing, Is there a driver or firmware I need? Build specs below:

PCPartPicker part list: http://pcpartpicker.com/p/1YzPX

CPU: Intel Core i5-4670K 3.4GHz Quad-Core Processor

CPU Cooler: Noctua NH-D14 65.0 CFM CPU Cooler

Motherboard: Asus Z87-PRO ATX LGA1150 Motherboard

Memory: G.Skill Ripjaws X Series 16GB (2 x 8GB) DDR3-1866 Memory

Storage: Samsung 840 EVO 250GB 2.5" Solid State Disk

Storage: Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive

Video Card: XFX Radeon HD 7870 2GB Video Card

Case: Fractal Design Define R4 w/Window (Black Pearl) ATX Mid Tower Case

Power Supply: Corsair 760W 80 PLUS Platinum Certified ATX12V / EPS12V Power Supply

Operating System: Microsoft Windows 8.1 (64-bit)

Monitor: Asus VS238H-P 23.0" Monitor
 
if the bios is seeing the hardd drive it be under the boot menu for hard drives there be the ssd and the hard drive. with just the power plugged to the hard drive is the drive spining when you feel it?? check that the data cables on right and the sata port not snapped on the drive.
 

kcripe

Honorable
Nov 10, 2013
3
0
10,510
Thanks for your response. The Hard drive is not showing under BIOS or Disk management. It does not spin up at all. Double checked cables, everything seems fine. Ill power down and try another sata data cable now. But I know the power cable works since it is powering my ssd as well. Unless a single power connector on those power adapter daisy chains can be bad?
 

kcripe

Honorable
Nov 10, 2013
3
0
10,510
yeah i just restarted using connectors that were on ssd and still nothing. SSD still works so I know cables and mobo ports are fine. Time to send my seagate back?