Sign in with
Sign up | Sign in
Your question
Solved

fx 6300 and 6350

Tags:
Last response: in CPUs
Share
November 10, 2013 11:37:14 AM

Is there really that much of a difference between these two cpus?? Will there by any performance differences if I am using a gtx 760 for the gpu????

More about : 6300 6350

Best solution

a b à CPUs
November 10, 2013 11:41:04 AM

No, get the cheaper one. You can always overclock the cheaper one by a little and get the same performance as the more expensive one.
Share
November 10, 2013 11:41:06 AM

One is 125 watts while the other is 95 watts, this affects motherboard compatibility. There will be little difference in frame rate especially if you overclock. Go with the 6300.
m
0
l
Related resources
a b à CPUs
November 10, 2013 11:41:24 AM

Not really. They're basically the same CPU, however one is overclocked compared to the other. Save the 10$ and overclock it yourself if you feel the need of it.

The FX 6300 will be the perfect match to your GPU, they're a well balanced and will compliment each other nicely. :) 
m
0
l
a c 85 à CPUs
November 10, 2013 11:41:49 AM

No they are both unlocked CPU's and the 6300 can be set to the same speed as the 6350 just by changing the multiplier in the bios. Both should run at 4Ghz with a good cooler:) 
m
0
l
November 10, 2013 11:47:11 AM

So will be more cost efficient if i get a fx 6300 with a 970-g43 and a cm hyper 212 evo plus, and over clock the cpu???
- (also sorry for asking this in this section, but will it not bottleneck the gtx 760??)
m
0
l
a c 176 à CPUs
November 10, 2013 11:47:51 AM

the 6300 and 6350 are the exact same cpu. the difference is the 6350 is set at a higher stock speed. you can easily overclock the 6300 to match the 6350... and both will have similar max overclocks.

get the cheaper one.

joseph0510 said:
So will be more cost efficient if i get a fx 6300 with a 970-g43 and a cm hyper 212 evo plus, and over clock the cpu???


unless you plan on adding heatsinks to that motherboard i would not overclock ANYTHING plugged into that board. That is not an overclocking motherboard. It has low quality and few vrm, and no heatsinks for them or the northbridge. If you overclock with that board you'll run the risk of killing the board and cpu both.
m
0
l
a c 85 à CPUs
November 10, 2013 11:50:20 AM

Yes it will be fine. It might bottleneck on some older single threaded games but not most newer games
m
0
l
November 10, 2013 11:55:12 AM

Alright then, I'll just get a 6300 with a g43 and a cooler. Thanks everyone for answering so quick!
m
0
l
!