Im buying parts for my first PC build and im worried about having lots of problems with wiring the power supply to everything needed on the motherboard. I know all my parts are compatable but i was wondering if anyone knows how i can be sure im doing it right when that comes.
Computer Building Wiring
- Thread starter Zezurge
- Start date
Solution
It is fairly simple. The motherboard will have an instruction book with clear diagrams and instructions, well all i have had so far have.
The motherboard has all the pins, plugs and sockets clearly labelled too.
For the first build though it might be better to have someone who knows what they are doing helping you.
There are a few rookie mistakes that can be made.Here are a couple of links for you to look at
http://www.pcpro.co.uk/features/379330/how-to-build-a-pc-a-step-by-step-guide
http://www.buildeasypc.com/
The motherboard has all the pins, plugs and sockets clearly labelled too.
For the first build though it might be better to have someone who knows what they are doing helping you.
There are a few rookie mistakes that can be made.Here are a couple of links for you to look at
http://www.pcpro.co.uk/features/379330/how-to-build-a-pc-a-step-by-step-guide
http://www.buildeasypc.com/
zink1701
Honorable
- Sep 14, 2012
- 1,174
- 0
- 11,960
As long as the PSU is big enough to power the hardware (the wattage rating) then it will all work fine. Best way is to install the PSU first in the case, then install HDD's and DVD drives ect. Then fit the CPU, heatsink and ram on the motherboard before fitting it in the case (makes life easier in the long run and take care when mounting the CPU). Use good cable management and plug all the relevant leads from the case, HDD's ect then plug the power leads into the motherboard and hardware. The PSU will come with all the required plugs and adapters as will the GPU.
swilczak
Distinguished
- Apr 12, 2012
- 1,032
- 0
- 19,860
It all fits together like a puzzle, making it almost impossible to plug the wrong wires in. The hardest part is wiring the on/off switch, speaker, reset, and LED lights in the front but there is a diagram that comes with the motherboard, just make sure you follow it carefully.
jay2577
Honorable
- Jun 17, 2012
- 1,844
- 0
- 12,460
It is fairly simple. The motherboard will have an instruction book with clear diagrams and instructions, well all i have had so far have.
The motherboard has all the pins, plugs and sockets clearly labelled too.
For the first build though it might be better to have someone who knows what they are doing helping you.
There are a few rookie mistakes that can be made.Here are a couple of links for you to look at
http://www.pcpro.co.uk/features/379330/how-to-build-a-pc-a-step-by-step-guide
http://www.buildeasypc.com/
The motherboard has all the pins, plugs and sockets clearly labelled too.
For the first build though it might be better to have someone who knows what they are doing helping you.
There are a few rookie mistakes that can be made.Here are a couple of links for you to look at
http://www.pcpro.co.uk/features/379330/how-to-build-a-pc-a-step-by-step-guide
http://www.buildeasypc.com/
TRENDING THREADS
-
Question Can´t open BIOS because no keyboard input is received.
- Started by Blatscher
- Replies: 8
-
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 34
-
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 4
-
RTX 4070 vs RX 7900 GRE faceoff: Which mainstream graphics card is better?
- Started by Admin
- Replies: 73
-
Facebook
Twitter
Instagram