Where to locate dual 120mm radiator for CPU?

Lumber-jack

Honorable
Jun 30, 2013
143
0
10,710
I have a Thermal take 2.0 dual 140mm radiator and a NZXT Phantom 630 case and am not sure where I should attempt to mount it and have two locations that would require modifications:

1. On the top where two 200mm fans are already and make a bracket so that it can bolt to it as none of the holes line up for the radiator.
2. On the bottom but I would have to remove the mounting rail bracket for the 3.5 inch HDD bays. I would have to drill out the rivets for the bracket though. I am only running some SSD's anyhow and was thinking of putting the removable 3.5" rail bracket in it's place or simply putting the SSD's in the 5.25" bays with adapters.

If I was to do #2 I could stack 4 fans in a push pull configuration on both sides of the radiator as well. I am also unsure if I should pull from the bottom of the case in or push out. I am thinking of pulling since at least 3 other fans on the bottom are pulling and 3 are pushing out on the top and it would keep good air flow in the case.

Here is some pics of the case:
http://imageshack.us/photo/my-images/853/cnv5.jpg/
http://imageshack.us/photo/my-images/194/lfnj.jpg/
http://imageshack.us/photo/my-images/824/kfnp.jpg/