So yesterday I was messing around with my pc sadly something went wrong
well my old pc settings where 4.8ghz @ 1.45 volts nb @ 2600mhz auto volted ht @ 2600 cpu temps never went over 56c board temps on load where up to 50c gpu temps never went over 66c, i can't figure out why it won't post anymore!! When I turn it on hdd drives spin up so do fans they stay on I have a speaker installed on ny pc and its supposed to beep when it boots or there's an error and it doesnt beep at all even if I try to post without ram I even tried a different gpu cpu different rams on different slots different power supply tried the gpus on the first two pci e slots only I even took out my parts and set it up on a flat piece of cardboard with no print!! This all happened when i tried to do 5ghz on the cpu and 2800mhz on the nb i put 1.485 volts on the cpu and i kept the nb on auto it froze as soon as the bios booted so I shut it down then it didn't post at all This is a new board its only about a month old p.s. when I boot up the stuff does warm up including the heatsinks on the mobo and the cpu itself the only thing that doesn't heat up is my gpu which usually idles the hottest so that made me think but bleh someone help me thanks much love!! , my specs are as followed
Cpu: fx8350
Ram:16gb kingston ddr3
Mobo: asus m5a99fx pro r2.0
Psu: thermaltake tough power 775
well my old pc settings where 4.8ghz @ 1.45 volts nb @ 2600mhz auto volted ht @ 2600 cpu temps never went over 56c board temps on load where up to 50c gpu temps never went over 66c, i can't figure out why it won't post anymore!! When I turn it on hdd drives spin up so do fans they stay on I have a speaker installed on ny pc and its supposed to beep when it boots or there's an error and it doesnt beep at all even if I try to post without ram I even tried a different gpu cpu different rams on different slots different power supply tried the gpus on the first two pci e slots only I even took out my parts and set it up on a flat piece of cardboard with no print!! This all happened when i tried to do 5ghz on the cpu and 2800mhz on the nb i put 1.485 volts on the cpu and i kept the nb on auto it froze as soon as the bios booted so I shut it down then it didn't post at all This is a new board its only about a month old p.s. when I boot up the stuff does warm up including the heatsinks on the mobo and the cpu itself the only thing that doesn't heat up is my gpu which usually idles the hottest so that made me think but bleh someone help me thanks much love!! , my specs are as followedCpu: fx8350
Ram:16gb kingston ddr3
Mobo: asus m5a99fx pro r2.0
Psu: thermaltake tough power 775
Facebook
Twitter
Instagram