You are not going to get all that low level dust off there with a vac. You need an air blast to get it off. I use a shop air gun to blow my rig out. Just let it sit for a few hours to let any possible condensation evaporate before you power on.
You are not going to get all that low level dust off there with a vac. You need an air blast to get it off. I use a shop air gun to blow my rig out. Just let it sit for a few hours to let any possible condensation evaporate before you power on.
Not expecting an answer considering how old this thread is, also didnt see the point in making a new one.
If a 500W vac wont get low level dust then how do you get it out? Compressed air just blows it around the case.