Hi there this is my first post so please bare with me. Just built a new computer with one ssd and one 3tb hd. So i installed windows 8.1 on the ssd. After I did the install only 2tb could be allocated. The 748 could not. There was a 350mb reserved partition attatched to the 2tb partition. After doing some research I changed the sata cables and did a re install. During the windows set up it installed 4 partitions. 100mb, 300mb, 128mb and primary ssd. I installed all of them. After this I was able to allocate my full 3tb located in disk 1. The ssd, 100, 300 are located in disk 0. But now there is no 350mb reserved partition. Just the 4 I mentioned. Every time I fix one problem another one occurs. I just would like to know if I can continue using the computer like this without the 350mb d: drive partition? I've searched and searched forums and can't find a definitive answer. What I'm trying to aim for is having c: ssd osinstalled, d: 350mb reserved and e: full 3tb allocated. Much appreciation to whom ever can help out with this issue. It's been driving me mad. I'm not sure how to attach a screen shot.