Sign in with
Sign up | Sign in
Your question
Solved

PSU voltage ok?

Last response: in Systems
Share
November 17, 2013 8:57:14 AM

i used cpuid. but i want to make sure that my voltages are ok and that my PSU is ok.


CPUID HWMonitor Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

HWMonitor version 1.2.4.0

Monitoring
-------------------------------------------------------------------------

Mainboard Model P9X79 PRO (0x00000262 - 0x02F3364C)

LPCIO
-------------------------------------------------------------------------

LPCIO Vendor Nuvoton
LPCIO Model NCT6776
LPCIO Vendor ID 0x5CA3
LPCIO Chip ID 0xC3
LPCIO Revision ID 0x33
Config Mode I/O address 0x2E
Config Mode LDN 0xB
Config Mode registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 FF FF 00 FF FF FF FF 0B FF FF FF FF FF FF FF FF
10 FF FF FF FF FF FF FF FF FF FF C8 6E 03 00 FF FF
20 C3 33 FF 00 20 00 00 00 00 FF 68 00 80 00 00 01
30 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
60 02 90 00 00 FF FF FF FF FF FF FF FF FF FF FF FF
70 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Register space LPC, base address = 0x0290


Hardware Monitors
-------------------------------------------------------------------------

Hardware monitor Nuvoton NCT6776
Voltage 0 1.06 Volts [0x84] (CPU VCORE)
Voltage 1 12.19 Volts [0x7F] (+12V)
Voltage 2 3.39 Volts [0xD4] (AVCC)
Voltage 3 3.38 Volts [0xD3] (+3.3V)
Voltage 4 5.04 Volts [0x7E] (+5V)
Temperature 0 27°C (80°F) [0x1B] (Mainboard)
Temperature 2 35°C (94°F) [0x45] (CPU socket)
Temperature 3 34°C (93°F) [0x22] (CPU)
Fan 1 1433 RPM [0x599] (CPUFANIN)
Hardware registers
Register space LPC, base address = 0x0290
bank 0
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 04 A3 04 5A 00 FF FF FF FF FF FF FF FF FF FF FF
10 04 A3 00 A3 5A A3 FF FF 40 00 00 00 00 84 00 00
20 84 7F D4 D3 7E FF 6A 1B FF FF FF DA 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF FF
40 03 00 40 FF FF 00 3F FF 2D FF FF FF 18 05 00 A3
50 FF FF FF FF FF FF FF FF C1 FF FF FF FF 04 04 FF
60 30 FF FF FF FF 01 00 FF FF FF FF FF FF FF FF FF
70 00 0A 00 22 80 22 80 22 80 FF FF FF FF FF FF FF
80 FF 03 1F 0F FF 3C 3C 3C 00 00 00 00 00 00 00 00
90 0A 00 00 00 00 0A 0A 0A 0A AA EF 80 FF 40 46 C4
A0 0E 01 00 00 FF 00 00 FF 00 00 80 66 66 06 01 01
B0 00 00 00 00 00 00 28 00 1C 00 00 34 28 80 C4 FF
C0 01 00 00 00 00 00 00 00 00 1C 06 FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 1
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 2
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 3
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 4
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 5
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 6
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 7
80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Hardware monitor AMD ADL
Voltage 0 0.85 Volts [0x352] (VIN0)
Temperature 0 30°C (86°F) [0x1E] (TMPIN0)
Fan 0 1125 RPM [0x465] (FANIN0)


Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 8

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Thread 1 1
-- Core 1
-- Thread 0 2
-- Thread 1 3
-- Core 2
-- Thread 0 4
-- Thread 1 5
-- Core 3
-- Thread 0 6
-- Thread 1 7

Timers
-------------------------------------------------------------------------

ACPI timer 3.580 MHz
HPET timer 14.318 MHz
Perf timer 3.621 MHz
Sys timer 1.000 KHz
BCLK timer 102.98 MHz


Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 4 (max 16)
Number of threads 8 (max 32)
Name Intel Core i7 3820
Codename Sandy Bridge-E
Specification Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
Package (platform ID) Socket 2011 LGA (0x2)
CPUID 6.D.7
Extended CPUID 6.2D
Core Stepping C2
Technology 32 nm
TDP Limit 130 Watts
Tjmax 100.0 °C
Core Speed 1235.8 MHz
Multiplier x Bus Speed 12.0 x 103.0 MHz
Rated Bus speed 3295.5 MHz
Stock frequency 3600 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 10 MBytes, 20-way set associative, 64-byte line size
FID/VID Control yes


Turbo Mode supported, enabled
Max non-turbo ratio 36x
Max turbo ratio 57x
Max efficiency ratio 12x
Min Power 40 Watts
O/C bins +6
Ratio 1 core 57x
Ratio 2 cores 57x
Ratio 3 cores 57x
Ratio 4 cores 57x
TSC 3707.9 MHz
APERF 3913.9 MHz
MPERF 3707.9 MHz

More about : psu voltage

a c 1427 ) Power supply
November 17, 2013 9:29:02 AM

What PSU do you own?
Related resources

Best solution

a c 1427 ) Power supply
November 17, 2013 9:40:27 AM
Share

Seems fine , are you having issues?
November 17, 2013 9:46:34 AM

yeah my fan is making a clicking sound
a c 1427 ) Power supply
November 17, 2013 9:48:29 AM

I would RMA it , because you will have more issues with it.
November 17, 2013 9:50:04 AM

and unfortunately i wont be able to buy another a psu for a few weeks. i just bought a new gpu. hd 7970 matrix
November 17, 2013 9:50:30 AM

yeah ive had it for a for almost 2 years sadly.
November 17, 2013 9:50:39 AM

thanks anyways
a c 1427 ) Power supply
November 17, 2013 9:53:07 AM

I would wait till you get another unit before using the new card.
November 17, 2013 9:56:15 AM

yeah the new card is in, already and i gave my old card to a buddy. im shit out of luck. thanks though
a c 1427 ) Power supply
November 17, 2013 9:57:06 AM

Manufacturer Warranty

It's still under Warranty.

Parts
3 years limited

Labor
3 years limited
November 17, 2013 11:00:01 PM

yeah i blew it out earlier w/ an air compressor and it stopped clicking. maybe dust was blocking it. its weird though, i build alot of dust in my comp but i usually blow it out every 60-90 days. so hopefully that was the cause.

ill try to call again tmrw. they did not answer, i assume because it was Sunday.
!