alienware 046mhw runs crazy hot during idle and especially under load

xbomb

Honorable
Nov 19, 2013
5
0
10,510
I have a Lower end ALienware Aurora that has recently started having the fans kick up to amazing heights. I used CPUID HWmonitor and ran Dell's diagnostic tests and during the test (and while playing nearly any game) the Motherboard temp will average out at 103c and spiked to 107c. Seems like everything is running hot and it did not used to perform like this.. not sure what to do.
I haven't changed any voltages or anything since I got the thing.

Here is the info as I idle and write this:
Operating System
Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 2300 @ 2.80GHz 74 °C
Sandy Bridge 32nm Technology
RAM
6.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-25)
Motherboard
Alienware 046MHW (CPU 1) 80 °C
Graphics
SyncMaster (1680x1050@60Hz)
1023MB NVIDIA GeForce GT 545 (NVIDIA) 36 °C
1023MB NVIDIA GeForce GT 545 (NVIDIA) 30 °C
ForceWare version: 331.65
SLI Enabled

Motherboard:
Motherboard
Manufacturer Alienware
Model 046MHW (CPU 1)
Version 00
Chipset Vendor Intel
Chipset Model Sandy Bridge
Chipset Revision 09
Southbridge Vendor Intel
Southbridge Model P67
Southbridge Revision B3
System Temperature 80 °C
BIOS
Brand Alienware
Version A06
Date 5/25/2011
Voltage
+3.3V 3.312 V
CPU CORE 1.376 V
VIN2 2.320 V
VIN3 1.294 V
+5V 3.784 V
+12V 16.192 V
VIN6 3.360 V
VSB3V 3.312 V
CMOS BATTERY 3.328 V
 
Solution
Ever blow the dust out? Those 2 x GT 545 cards don't seem to be hot. But the CPU is too warm. Especially if that is idle temps! Have you checked the cooler to see if it is loose? If the PC has been in use for a couple years, it may be time to replace the thermal paste between cooler and CPU.

clutchc

Titan
Ambassador
Ever blow the dust out? Those 2 x GT 545 cards don't seem to be hot. But the CPU is too warm. Especially if that is idle temps! Have you checked the cooler to see if it is loose? If the PC has been in use for a couple years, it may be time to replace the thermal paste between cooler and CPU.
 
Solution

xbomb

Honorable
Nov 19, 2013
5
0
10,510
Machine was pretty dust free, and all fans working. Replaced the paste... no change. However another suggestion was that the pump on the water cooling went out... replaced it with a corsair h55... works great now