Blue screen's on newly built pc. Win8

zRuins

Honorable
Nov 19, 2013
22
0
10,510
Hi long time lurker of the forum, and have had a lot of help so far.
I'm at my wits ends and really need some help, so i thought its a better time than any to sign up :).

ok here goes. After building my pc about 2 weeks ago now I started getting blue screens which i believe to be hardware related.

Most error codes I get are:

System service Exception.

Page Fault in non paged area.

Memory management .

and

attempted execute of nonexecute memory.

Most of these are "caused" by one of the following, Win32k.sys, Ntoskrnl.exe and wdfilter.sys

Though the "Wdfilter.sys has not happened often as the other two i thought I should list it.


Some more Details.

Specs
i5 4670k @Stock
Asrock z87 Extreme 3
Sapphire r9 280x Dual X oc
8gb Corsair Vengeance 1.5v 1600mhz memory (Dual channel)
120gb Samsung 840 Evo SSD (boot Drive)
1tb WD Blue
CM Hyper 212 Evo
Corsair TX650m

The BSod's can happen at almost anytime, Watching a Video or playing a game seems to cause it to Blue screen almost instantly as does doing a blend test in prime 95, though when i do a
small fft test it doesn't crash or at least not very quick.

The kicker is though after i reset my pc once or twice it works fine till i shutdown and turn it back on in the morning.

I have done memtest a couple times.

i have done 4 test's where it has past.

and another on first boot of another day and about 4000 errors in about 2 seconds.

I have updated drivers and firmware to latest on pretty much everything.

I only have a couple programs installed also.

Should I just send back the ram?

Thanks.

 

zRuins

Honorable
Nov 19, 2013
22
0
10,510


I'm not overclocking.
I'm pretty sure bios version is 2.10 which is the newest,
Could Underclocking to stock the gpu actually help? its at 1020mhz atm which is the boost clock.
 

zRuins

Honorable
Nov 19, 2013
22
0
10,510


Sorry I haven't replied, I have had things to do recently.

Anyway i do not believe the Video card clock speed is the problem as i have had multiple Bsod's with it not in the system and no drivers installed.

Today i decided to start memtest86+ v5.01, within the first couple of seconds I got over 7000 errors. but when i restarted again i got no errors?

Really need some help :(
 

TRENDING THREADS