Solved

Corsair Vengeance w/ Hyper 212 EVO & Maximus Hero MoBo

Will the standard height Corsair Vengeance modules fit using a CM Hyper 212 EVO and Maximus Hero? I know they made Low Profile modules because some coolers go over the RAM slots.

I have not yet bought my components and wondering if the standard ones will fit as they appear to be cheaper than their LP counterparts (not by much but im on a budget).
If it's relevant I'll be using a Corsair Carbide 400R case.

Thanks in advance.
5 answers Last reply Best Answer
More about corsair vengeance hyper 212 evo maximus hero mobo
  1. The mount for the fan allows you mount the fan higher on the heat sink for clearance, if needed.

    I had soem RAM with rather tall heat sinks and was able to clear it by mounting a1/4"-1/2" higher on the heat sink.

    Of course, you need to have a little clearance between the top of the heat sink and the case to allow for the fan-shift.
  2. Also if you only have 2 modules you can put them in slots 2 and 4 instead of 1 and 3 and there should be no clearance problems.
  3. Best answer
    You should be fine w/ no problems ;)
  4. Thank you for the assuring and quick replies! I'll go with the standard modules and mess around adjusting the height of the cooler :)
  5. Let us know how all turns out ;)
Ask a new question

Read More

Standard Memory Corsair Evo