Sign in with
Sign up | Sign in
Your question

AsRock H77 Pro4/MVP Problem with RAID 1

Tags:
  • NAS / RAID
  • Configuration
  • Hard Drives
  • Motherboards
Last response: in Motherboards
Share
November 21, 2013 6:37:49 AM

Hi I have problem to configure RAID 1 for my motherboard. I have 2 HDD 1TB attached on SATA3_A1 and SATA3_A2 port and I want to use it as mirror.

I go in Advanced Storage Configuration and on SATA Mode Selection I put RAID, save and exit
Then I go in Boot and make Boot Mode Ultra Fast BUT still there is no post on bios to make RAID configuration... I suspect my HDD are attached in wrong SATA ports here is some images.

Tell me what you think about this ?

http://s13.postimg.org/5tloxg2af/20131121_151130.jpg

http://s13.postimg.org/5uvmqv447/20131121_151145.jpg

http://s13.postimg.org/5je6e3no7/20131121_151156.jpg

http://s13.postimg.org/byd7arudz/20131121_151305.jpg

More about : asrock h77 pro4 mvp problem raid

a b V Motherboard
November 21, 2013 6:53:12 AM

Look what it says for AS media mode AHCI

Where have you plugged the two 1Tb drives into?

The two AS media ports

A1 A2.

Is that raid mode ?

What mode should it be set to Hint.
The AS media mode, Ahci, Sata, Or Raid.

You have two sata chips on the board.


m
0
l
November 21, 2013 6:56:39 AM

Sorry I'm not too much deep in the hardware. So you think I can't set raid mode in A1 A2 ports ?

EDIT : Yes I get it loool

Thanks
m
0
l
!