i bought 8gb of ddr3 1600 corsair vengeance ram, but by defualt it runs at 1333 not 1600. i read the reviews and this seems to be a fairl common problem; most people say to increase voltage to 1.5v. My BIOS says it is already running at 1.5v so what should i increase the voltage to safely run at 1600?
Corsair vengeance 1600 underclocking to 1333?
- Thread starter Vichy97
- Start date
Solution
- Nov 11, 2013
- 12,756
- 48
- 57,640
That isn't a problem at all. All memory defaults to 1333 or 1600 in some newer boards, you have to manually adjust it in bios to run at the rated timings/speed.
If you'll tell me what board, memory, and processor you have I can get you up and running at 1600 (assuming the cpu/board are capable)
PS: if you have an overclocking setting called XMP or DOCP enable it and it should work right away.
If you'll tell me what board, memory, and processor you have I can get you up and running at 1600 (assuming the cpu/board are capable)
PS: if you have an overclocking setting called XMP or DOCP enable it and it should work right away.
TRENDING THREADS
-
-
-
Question Download speed is slow on only my PC - please help!- Started by Ograsmium
- Replies: 16
-
-
Question New installed W11 on sdd, D drive (HDD) goes to the 100% in seconds
- Started by Emily_Vin
- Replies: 7
Facebook
Twitter
Instagram