Computer startup problem

Radoslaw · Nov 22, 2013

Hello,

I bought the Gygabite FXA UD3 MOBO , GTX 770 jetstream, AMD FX 8350
and I THINK when i overclocked the CPU from 4 to 4.7ghz this is when the problem appeared.

Problem: When i turn my PC on it starts... after a second turns off, starts again.. turn off. on the third turning on its working (turn off and on automatically i dont do nothing).
Any Ideas? ITs not a problem for me but Im worried for my hardware... is it safe ? and is it right?
PSU: 620W
8BG ADATA 1333RAM

EDIT: Okay when I downclocked it it was working good.. but when i tried only turning ON LLC to Ultra High and adding 15 FSB + (from 200 to 215) without touching to voltages it restarts again when i turn it on.. but only one time.. second is successful

What should I do.. just ignore it?

zink1701 · Nov 22, 2013

It sounds like a bad overclock, some boards will automatically revert you overclock back if there is a problem (not enough power to the CPU or incorrect or not enough voltage, incorrect setting in bios). Any of those will cause your machine to reboot as it boots. Go into bios and revert the settings to default and see if the problem persists, if it does please let us know.

Radoslaw · Nov 22, 2013

zink1701 :

Well its okay now but why is this happening .. i mean i never set a voltage below stock values... and my vcore was like 1.5 + ...also like i said.. after the third self-reboot (is a 10 seconds) it works fine.,.. and always reboots 3 times...(3rd successful) what should i do now...

Radoslaw · Nov 23, 2013

Okay when I downclocked it it was working good.. but when i tried only turning ON LLC to Ultra High and adding 15 FSB + (from 200 to 215) without touching to voltages it restarts again when i turn it on.. but only one time.. second is successful

What should I do.. just ignore it?

Search

Computer startup problem

Radoslaw

Honorable

zink1701

Honorable

Radoslaw

Honorable

Radoslaw

Honorable

TRENDING THREADS

Latest posts

Moderators online

Share this page